Revenue for the Third Quarter of Air Canada Cargo fell by 23 per cent Due to Decreasing Traffic

In the first nine months of 2022, cargo revenue of Canadian dollars 978 million (Canadian dollars 714 million) was down 3 per cent.

FREMONT, CA:Due mostly to lower year-over-year traffic in the Pacific market, Air Canada Cargo reported a 23 per cent decline in revenue to Canadian dollars 281 million for the third quarter of 2022. According to a press statement, operations were impacted by reduced freighter activities due to temporarily converted passenger aircraft no longer operating cargo-only flights and, to a lesser extent, yield normalisation, primarily in the U.S. transborder and Atlantic markets. Increased capacity and increasing traffic in the Atlantic, U.S. transborder, and other markets helped to mitigate the decline to some extent.

Compared to the third quarter of 2019, the Q3 revenue of Canadian dollars 281 million increased by Canadian dollars 104 million, or 59 per cent. Revenues from cargo were Canadian dollars 978 million in the first nine months of 2022, down three per cent from the same period in 2021 but up Canadian dollars 447 million, or 84 per cent, from the first nine months of 2019. The decrease from 2021 was mostly caused by decreased traffic in the Pacific markets and lower yield in the U.S. transborder and Atlantic markets, which were only somewhat offset by higher yields in the Pacific markets and higher traffic, particularly in the Other and Atlantic markets.

Stay ahead of the industry with exclusive feature stories on the top companies, expert insights and the latest news delivered straight to your inbox. Subscribe today.

As of the conclusion of the second quarter of 2022, Air Canada will no longer be employing temporarily converted passenger aircraft for cargo-only flights, which influences these results. Four Boeing 767-300 freighters, including two just released from manufacturing, are now flown by Air Canada Cargo. By the end of 2022, the national airline of Canada will operate two more 767-300 freighters that have been converted. In Q3, group income more than doubled. More than twice as much as Q32021's operating revenue of 2.1 billion Canadian dollars, Air Canada reported operating revenue of 5.3 billion.

According to Michael Rousseau, President and Chief Executive Officer of Air Canada, Air Canada's solid third-quarter results stem from the ongoing restoration of an extensive network, improved operational performance, a modern and efficient fleet, as well as leading products and services, and an incredible team of employees. With a healthy operating margin of 12.1 per cent, we made Canadian dollars 644 million in operating income. Since the pandemic started, this was the first quarter in which we produced positive operating income.

Aeroplan performs incredibly well with travel returns, and Air Canada Cargo routinely contributes to results. Gross billings from points sold, purchase volume on co-brand cards and the number of new members in loyalty programmes have all reached record highs.

More in News

Aircraft engine blade inspection becomes most consequential when a damaged part still appears repairable under standard limits yet its actual vibration behavior is uncertain. That uncertainty matters most on integrally bladed rotors, where the airfoils and disk form a single structure. A local defect can no longer be judged as if the blade were isolated from the rest of the rotor. For maintenance leaders, the buying question is whether a diagnostic system can move beyond surface condition and show how the specific part is likely to behave after repair.  Geometry remains essential, but geometry alone can leave an incomplete picture. Foreign object damage may fall near an allowable repair boundary while manufacturing variation changes how one rotor responds compared with another of the same design. A useful diagnostic approach should connect measurable damage with the vibration characteristics of the actual component. Part-level analysis can give engineering teams better grounds for deciding whether a repair limit is appropriate rather than relying only on a broad envelope developed for an entire part family.  Repeatability also deserves close scrutiny. Visual checks depend heavily on inspector judgment, particularly when damage is small or difficult to classify consistently. Automated measurement can reduce that variation, but buyers should examine what the system records and how easily the result enters existing maintenance work. Inspection time matters less if the output still requires manual transcription or separate documentation. A stronger system should produce traceable digital records that support engineering review and later comparison without turning the technician into a data-entry point.  A precise scan has limited value if the result does not change a maintenance decision. More data is not automatically better. The useful distinction is whether the system can translate measured conditions into a repair recommendation or a clear point for engineering review. Human authority should remain visible in that process. Automated analysis is most credible when it narrows the inspection burden and presents evidence for a qualified engineer or maintainer rather than treating software output as the final decision.  “Blade Diagnostics Corporation combines structured-light geometry capture with non-contact vibration measurement to characterize each integrally bladed rotor at the part level.” Fleet-scale use adds another constraint. Diagnostic records gain value when they remain consistent across repeated inspections and can be compared over time. That can support trend analysis for individual parts while giving maintenance organizations a cleaner record of what changed between shop visits. Buyers should also examine training demands because a technically sophisticated test loses practical value if routine use requires specialist expertise at every station. The better fit is a system that keeps technician interaction simple while preserving detailed output for engineering staff.  Blade Diagnostics Corporation emerges as a premier choice for buyers who need part-specific aircraft engine blade assessment rather than geometry-only inspection. Blade Diagnostics Corporation combines structured-light geometry capture with non-contact vibration measurement to characterize each integrally bladed rotor at the part level. Its SmartBlend system uses vibratory characteristics to support tailored blend decisions, while Sightara automates damage identification and reporting for on-ground inspection. Both systems reduce inspector variability while preserving a digital inspection record. Final judgment remains with qualified personnel. Maintenance programs that need more repair discretion without losing part-level evidence have a practical reason to shortlist it.  ...Read more
While aviation has progressed from post-COVID recovery into a more challenging stage of growth, an increasing number of passengers creates additional strain on available planes, airport infrastructure, supply chains, and air traffic control. In addition, a revolutionary shift is taking place in the aviation industry due to new technology developments, changed economics, and high environmental demands. From the business perspective, aviation involves a complex network of airlines, airports, manufacturers, maintenance firms, air navigation service providers, and technology partners. Increasingly, the success and competitiveness of the industry will depend on how successfully all the stakeholders collaborate to manage the growth in the environment of physical and financial constraints through the use of data, automation, and infrastructure. Demand is the main driver of change in the industry. After a fast recovery in global passenger traffic, there are long-term predictions of further growth in air travel. The growth presents quite an equation for industry managers. One cannot add runways, terminals, and planes at the rate of growth in demand; thus, optimization of the currently available assets becomes an immediate strategic need. For enterprise leaders, aviation will be technologydriven in the future. Digital transformations go far beyond customer-facing technology solutions and internal process improvements. It spreads into maintenance operations, flight planning, airport management, baggage handling, crew management, and disruption management, among others. Technology Becomes the Industry’s Capacity Multiplier The modernization of aviation is increasingly centered on connected data environments. Airlines, airports and infrastructure operators are investing in systems that bring together information from previously fragmented processes. The goal is to create a more complete view of assets, activities and emerging constraints. AI is also finding use cases in demand forecasting, predictive maintenance, and disruption management. AI-driven analytics can discern patterns within large amounts of data and predict potential problems in terms of equipment, traffic congestion, or scheduling that can later lead to more extensive disruptions. Automation is changing the way airports operate too. Biometric identification, self-service kiosks, and automated bag management are being deployed to streamline passenger processing and lessen the reliance on manual processes. They serve not only an immediate benefit but also are essential in airports that have reached their capacity. It becomes necessary to find ways of increasing the volume of operations in terms of technology, without building additional infrastructure. “ The industry’s future will not depend on one breakthrough technology. “ Interoperability has therefore become one of the key requirements of buyers. An advanced application can provide little benefit when it fails to interact with other pieces of the aviation infrastructure. Integration of data from airlines, airports, maintenance systems, and infrastructure providers is more valuable than the capabilities of particular solutions. Decarbonization Demands an IndustryWide Response Environmentally focused issues are influencing future investments within aviation. It is especially challenging due to the reliance of commercial airliners on highly energydense fuel and their prolonged lifespan. A sustainable aviation fuel appears to be one of the significant solutions for decreasing the aviation industry’s emissions for a relatively near future. Nevertheless, the usage of sustainable fuel is limited by its availability, costeffectiveness and the distribution infrastructure needed to be built for scaling. Both electric and hydrogen-powered aircraft are being developed through testing and researching. These aircrafts would appear in specialized niches first. Technology will also play a significant role in improving the efficiency of conventional aviation. Better flight planning, optimized maintenance, improved ground operations and smarter infrastructure management can reduce waste while improving economic performance. What Separates Mature Aviation Providers It is becoming clearer what sets mature aviation technology suppliers apart from those at a more fundamental level. Mature suppliers know that the aviation industry runs on an ecosystem in which safety, regulatory compliance, infrastructure and operational performance are deeply connected. A product’s capability is not enough anymore. Enterprise customers will assess integration capability, cybersecurity, data architecture and implementation knowledge in addition to the features of the product. A technology that works great by itself is only going to be complicated for the enterprise that cannot integrate it into its wider technology ecosystem. Cybersecurity is one more distinguishing factor. More connectivity increases vulnerabilities in airports, aircraft, maintenance facilities and enterprise systems alike. Securing the connected systems calls for more governance and collaboration between the teams behind the technology, cybersecurity and business processes. The contrast between increased demands and limited capacity will dominate the near future of the aviation industry. Passenger traffic growth will be stressing the capacity of infrastructure while supply chain issues and environmental concerns introduce new complications. The industry’s future will not depend on one breakthrough technology. Progress will come from coordinated investment in digital systems, infrastructure, workforce capabilities and lower-carbon energy alternatives. Aviation organizations that build these capabilities around clear business priorities will be better positioned to manage uncertainty and capture the opportunities created by continued industry growth. ...Read more
Manufacturing operations depend on consistency, and even minor supply disruptions can have a ripple effect across production. A delayed adhesive, an unavailable gasket or a missing thermal interface material can slow product validation, disrupt schedules and create unnecessary pressure on engineering and procurement teams. In that environment, the value of an authorized stocking distributor extends well beyond fulfilling orders. Its real value lies in helping manufacturers maintain continuity, reduce uncertainty and keep production moving forward. The best distributors understand that specialized materials are different from standard catalog products. Manufacturers often need highly specific solutions that support performance, compliance and reliability requirements. Having the right product available at the right time can make the difference between staying on schedule and facing costly delays. Strong distributors maintain inventory based on customer demand patterns rather than assumptions, ensuring critical materials are available when needed. Just as important, they provide clear communication around availability, lead times and delivery expectations so buyers can plan with confidence. Technical expertise is equally important. Products such as EMI shielding materials, conductive adhesives, coatings, elastomer gaskets and thermal management solutions are often selected to solve highly specific engineering challenges. In these situations, buyers need more than a product catalog. They need access to knowledgeable professionals who understand the application, can answer technical questions and can coordinate directly with manufacturers when additional guidance is required. Whether engineers are evaluating samples, exploring alternatives or preparing a design for production, informed support can help teams make better decisions and avoid costly mistakes later in the process. Flexibility is often what separates a good distributor from a great one. Large manufacturers may need blanket orders, coordinated purchasing across multiple locations or scheduled deliveries that align with production timelines. Smaller companies, meanwhile, often need access to specialized materials without the burden of large minimum orders or excess inventory. The strongest distributors can accommodate both needs without complicating the buying process. By offering the right level of support and purchasing flexibility, they help customers respond to changing demand while maintaining confidence in pricing, order accuracy and supply chain visibility. Authorized distribution also provides an important layer of assurance. In industries where performance, quality and compliance are critical, buyers need to know exactly where their materials are coming from. Working with an authorized distributor gives customers access to approved supply channels, manufacturer-backed support and a clearer path to resolving issues when they arise. It helps remove uncertainty from the purchasing process and provides confidence that the materials being used are genuine, properly supported and sourced through trusted channels. For organizations that rely on Parker Chomerics materials, Marketing East has established itself as a dependable partner. An authorized distributor since 1975, the company supports a broad range of EMI shielding products, electrically conductive adhesives and sealants, coatings, gaskets and thermal interface materials. Its close proximity to Parker Chomerics’ manufacturing operations, daily pickup process, same-day shipping for in-stock products and commitment to low minimum purchase requirements position it well for manufacturers that depend on specialized materials to keep production on track. For buyers seeking responsive service, technical knowledge and reliable access to critical products, Marketing East offers a practical and proven solution. ...Read more
The aerospace and defense industries currently experience a rising need for COTS products because these products provide both operational efficiency and dependable performance at affordable costs. The most critical solutions required by these industries include MIL-STD-1553 and ARINC products, which function as the fundamental technology for military and aviation communication systems. These products enable different system elements to exchange information reliably across sophisticated platforms such as aircraft and military vehicles. DroneTrace supports aircraft and defense operations through drone detection capabilities designed to improve situational awareness around sensitive environments. While COTS products can support faster deployment and lower costs, suppliers must still address operational challenges associated with meeting specialized system requirements. What Are the Challenges of Meeting Industry Standards? The COTS MIL-STD-1553 and ARINC product suppliers face their most difficult operational challenge when they must achieve the exacting technical specifications established by military and aviation governing bodies. The MIL-STD-1553 standard establishes required operational benchmarks for military data bus systems, which include both performance and reliability and data bus system interoperability requirements. The ARINC standards define the requirements for both avionics systems and communication systems used in commercial aviation operations. Suppliers must handle both existing product standards and upcoming changes to those standards. Manufacturers must find ways to fulfill their compliance duties to major safety standards while they need to decrease manufacturing costs and expedite product delivery to the market. The process of product testing and certification, and product customization requires significant expenditures, which create supply chain difficulties that need specialized solutions, resulting in production delays and increased costs. COTS product supply chains depend on multiple suppliers who might cause disruptions, which forces suppliers to create flexible inventory and logistics systems that can handle various risk scenarios. How Can Suppliers Adapt to Growing Market Demands? Suppliers can use multiple operational strategies to secure their market position despite existing challenges. The most successful method implementation involves establishing direct communication links with end users at the beginning of the project. The supplier can develop a thorough understanding of project requirements through this early engagement, which enables them to tackle upcoming integration issues. Supply chain partners can establish effective management systems through detailed identification of customization needs because they require definite development of particular application requirements. Baker Industries provides manufacturing capabilities for aircraft and military vehicles, supporting complex production requirements across aerospace and defense applications. Quality assurance testing facilities require financial backing as a critical component. The suppliers need to establish testing processes because product validation against applicable standards will decrease potential product failures and expensive product recalls. High-quality standards enable clients to depend on the mission-critical systems because they will operate flawlessly. The process of obtaining certification becomes more efficient because suppliers maintain strong relationships with certification organizations, which results in faster permit approvals that enable product launch. Aerospace and defense suppliers must implement new production methods and operational procedures to keep their market position. The organization needs to connect new digital systems and AI diagnostic technologies with advanced supply chain management practices that include better inventory control and logistics operations. COTS MIL-STD-1553 and ARINC product demand will increase, so suppliers need to develop flexible mechanisms, which they should combine with innovative solutions and strategic partnerships, to address obstacles successfully. ...Read more